Loading... Please wait...

Installation

Instructions   EZ Oil Drain Installation Instruction

1. Remove original drain plug and drain oil.
2.
Hand install the valve until tight, and give 1/8 turn with a small crescent wrench on the body.
DO NOT OVER-TIGHTEN!
*Please refer to the RECOMMENDED TORQUE chart below.
3. Close the lever and refill with engine oil.

TEMPERATURE RATING -40 ~ 365°F
PRESSURE RATING 250 psi

PART # (Small) lbs/ft Thread Size
EZ-124 11 M10X1.25
EZ-103 7 M12X1.25
EZ-107 8 M12X1.75
EZ-101 7 1/2 UNF-20
EZ-102 8 3/8 PT
EZ-104 8 M18X1.5
EZ-105 5 M20X1.5
EZ-109 7 M12X1.5
EZ-106 7 M14X1.5
EZ-108 10 M16X1.5
EZ-110 7 3/8NPT-18
EZ-111 7 M14X1.25
PART # (Medium) lbs/ft Thread Size
EZ-202 7 1/2 NPT-14
EZ-204 9 3/4 UNF-16
EZ-206 8 7/8 UNF-14
EZ-208 8 7/8 UNF-18
EZ-2 8 M18X1.5
EZ-3 7 M20X1.5
EZ-7B 13 M22X1.5
PART # (Large) lbs/ft Thread Size
EZ-200 13 1 NPT-11.5
EZ-201 8 3/4 NPT-14
EZ-203 13 1 UNF-18
EZ-205 11 1-1/8UNF-12
EZ-207 13 M26X1.5
EZ-209 14 1 UNF-14
EZ-210 10 1-1/16UNF-12
EZ-211 10 M27X2
EZ-5 11 M25X1.5
EZ-6 12 M24X2
EZ-7 13 M30X1.5
EZ-8 10 M24X1.5


When it's time for an oil change, using your EZ Oil Drain Valve is simple and easy.

1. Lift up the lever and turn counter-clockwise.
2. Turn back the lever to close.
3. Make sure the lever is secured in the locked position