Installation

Instructions EZ Oil Drain Installation Instruction

1.	Remove original drain plug and drain oil.
2.	Hand install the valve until tight, and give 1/8 turn with a small crescent wrench on the body． DO NOT OVER-TIGHTEN! *Please refer to the RECOMMENDED TORQUE chart below.
3.	Close the lever and refill with engine oil.

TEMPERATURE RATING	-40 ~ 365°F
PRESSURE RATING	250 psi

When it's time for an oil change, using your EZ Oil Drain Valve is simple and easy.

1.	Lift up the lever and turn counter-clockwise.
2.	Turn back the lever to close.
3.	Make sure the lever is secured in the locked position