|
A: Thread
14mm-1.5 B: 26.5mm
C: 7.5mm
D: 27mm
E: 26mm
F: 4.5mm
|
||||||||||
Use with Hose Ends
Hose Ends can be attached to the valves to allow a hose connection and draining oil away from engines with limited space. Hose Ends may be removed after use.
|
Showing reviews 1-20 of 60 | Next
Posted by Brycen on May/24/2024
I bought this and the extension for my 2020 Honda pilot,V6 and the adapter needs to be like 1/4 to 1/2" longer.It was a pain to get the adapter on with the valve.I had to put the valve on the extension first then the valve.After trying to install it the pilot oil pan is crap.I finally got it to tighten down but you need to bend the valve handle down to get it to close.
Posted by Roger on Mar/23/2023
Bought one of these 10 years ago to put on a 2012 Jeep JK with the 3.6 engine. Have not had any issue's with it. Purchased another one for a 2022 Jeep due to the ease of being able to do an oil change with no mess's. Got the short stem to attach a vinyl hose that I drain into a 2.5 gallon gas can I use for used oil.
Posted by George Gregory on Feb/18/2021
I have it on all my cars.
Posted by Jeff on Sep/22/2020
I had an EZ101 on my previous truck. It had the integral permanently attached hose end on it, still available today. I lost the push-on protective cap driving in snow. But I was otherwise very happy with its function. I bought an EZ106 for my current truck. I was pleased to find they now offered a screw in cap (loss resistant), as well as a variety of hose ends & accesories. It was always a good product, and has ony improved.
Posted by Richard Thomas on Jan/19/2020
Oil drain,well made product,works great,saves a lot of trouble .I do approve this product.
Posted by Andy Szoke on Jul/12/2019
Excellent product a lot less chances of spilled oil,great customer service
Posted by Mark on May/27/2019
Well made and works great. I am going to get one for my other jeep as well.
Posted by Ed on May/15/2019
It's good quality and operates good, but the only thing I don't like is once it is tightened, it may end up upside down, on the right side, on the left side, or like it should be. I wish it had another joint between the threads and the valve so you could get it upright and then tighten it in place so it sits rightside up like it shows on the diagram.
From OilDrainValve.net
This issue can be solved by a fiber gasket between the oil pan and the valve.(We feel bad we have to have you re-install the valve to put a gasket.) We will send a gasket for free. Please contact us (info@oildrainvalve.net) if you have this issue.
Posted by Charles Stelter on May/09/2019
Makes changing oil a breeze.I just installed them on my sons 2016 Ram 1500 and on my new 2019 Ford F350. Also have them on a 2008 Ford F250 and 2 Honda Pilots. The Fords and the Ram bolted right up to the pans. The Honda Pilots required the adapter.I would recommend them to everyone.
Posted by Kenster on Apr/29/2019
I have installed this item on every car I have owned. I love the convenience and the satisfaction of knowing that I will never strip out the threads from the factory installed, oil changing bolt.
Posted by Wayne A Livingston on Jan/02/2019
I have put these valves on all my vehicles, it makes oil changes so much easier. I have had to use the AL-106 adapter on my Hondas, but the rest didn't require anything other than the valve itself. I love them!
Posted by George on Dec/17/2018
Used it on all my cars works and seals perfect and make changing the oil easier and cleaner
Posted by Unknown on Aug/20/2018
Works great the last two I ordered haven't been installed yet, waiting to change oil. Have installed on three other cars and truck
Posted by Unknown on Aug/16/2018
Installed on my 05' F-150. Works great as you can empty straight into an empty oil jug using the hose end and a hose.
Posted by Danny P Bamber on Jul/24/2018
I just installed it that was real easy have not really used it as of yet but looks like it will work just fine. It was a snap to install.
Posted by johnrbales@excite.com on Jun/30/2018
This is ODV Number 6. All our vehicles have one.
Posted by Donald on Jun/21/2018
Easy install. Great not having to remove drain plug. Wish all vehicles had this. I own mobile oil change business and this would make my job tons easier.
Posted by J.S. on Feb/04/2018
I just installed it, so far no leaks. Easy to install! not having to buy new drain plugs and crush washers is very nice! No more wear and tear on the oil pan threads. Now no tools needed to do an oil change. (unless an oil filter wrench is needed)
Posted by Unknown on Dec/22/2017
Installed on my 2015 F350. Saves a lot of hassle, especially when draining 13 qts of hot oil.
Posted by Unknown on Oct/14/2017
This has made oil changing so much easier.. I love it!
Showing reviews 1-20 of 60 | Next